CALL US
EMAIL US

ATEX Pallet Truck Scales

ATEX Pallet Truck Scales

Northern Balance can supply ATEX Pallet Truck Scales suitable for use in ATEX zones.

Description

ATEX Pallet Truck Scales

Northern Balance can supply ATEX Pallet Truck Scales suitable for use in ATEX zones.

Featured Product: Dini Argeo TPWX2GDI “Hazardous Zone” Series Stainless Steel ATEX Pallet Truck Scale

Pallet truck scales, with built-in electronic weighing, for dangerous areas classified as hazardous (ZONES 1 and 21 & 2 and 22) in accordance with Ex II 2GD IIB T4 T197°C X. The weight detection made with four Atex certified IP68 stainless steel load cells guarantees the best precision in any working environment.

  • Maximum lifting capacity: 2000 kg.
  • Accuracy: +/- 0.1% of the maximum capacity in the versions for internal use.
  • Accuracy: +/- 0.05% of the maximum capacity in the “M” approved versions.
  • Fork dimensions 1182 x 550 x 80 mm.
  • Weighs about 135 kg.
  • Bearing structure entirely in extra thick sheet steel.
  • Lifting pump in stainless steel.
  • Steering wheels with rubber coating.
  • Double loading rollers with a poliurethane coating.
  • 4 stainless steel IP68 Atex certified shear-beam load cells.
  • Weight indicator with waterproof IP68 stainless steel case, easy to clean and resistant to harsh and corrosive environments; large high contrast 25mm LCD display, easily visible also in poor lighting conditions and waterproof membrane keypad, with 17 numerical/functional keys.
  • Calibration and Set-Up parameters configurable from keyboard.
  • Power supply through extractable battery, rechargeable in safe zone.
  • 150-hour approximate operating time.
  • Equipped with 230Vac 50 Hz battery charger to be recharged in a safe area.

 

Request More Information

 

Zone Guide

Zone 0 and 20

Areas where an explosive atmosphere of gas (0) or dust/air mixture (20) is present continuously or for long periods. Category 1 equipment can be used in these areas.

Zone 1 and 21

Areas where an explosive atmosphere of gas (1) or dust/air mixture (21) is likely to occur in normal operation. Category 2 equipment can be used in these areas.

Zone 2 and 22

Areas where an explosive atmosphere of gas (2) or dust/air mixture (22) is not likely to occur in normal operation and, if it occurs, will only exist for a short time. Category 3 equipment can be used in these areas.

 

 

Call Now